宿舍规范（Dormitory specification）.doc

宿舍规范（Dormitory specification） Code for design of dormitory buildings Source: landscape water conservancy network 1 General Provisions Article 1.0.1 This code is formulated to ensure that the architectural design of a dormitory is in conformity with the applicable, safe and hygienic requirements. Article 1.0.2 This code applies to the design of newly built, rebuilt and expanded dormitory buildings in towns and industrial and mining areas. Article 1.0.3 dormitory building design must follow the current state policies and the area of construction projects fixed quota. Article 1.0.4 dormitory building design, in addition to the implementation of this code, should also comply with the civil building design general principles, as well as national or professional departments issued by the relevant design standards, specifications and regulations. 2 base and general plane Article 2.0.1 dormitory sites should be provided with sunny conditions, well ventilated, dry sites and easy drainage areas. Noise and various pollution sources should be avoided, and the relevant health protection standards shall be met. Article 2.0.2 dormitory should be close to the living service facilities, such as canteen, canteen, recreation room, bathroom, hot water room, etc., the distance should not exceed 250m. Article 2.0.3 the vicinity of the hostel should be provided with small activity sites, centralized green land, clothes drying facilities and bicycle storage places, etc.. Article 2.0.4 the sunshine distance of the dormitory shall be carried out according to the provisions of the competent department for planning and administration of cities and towns throughout the country. Article 2.0.5 transit vehicles should be avoided in the dormitory area. 3 architectural design 3.1 general provisions Article 3.1.1 dormitory rooms should be arranged in groups, each group size should not be too large. Each group or group of rooms should be equipped with toilets, bathrooms or toilets. Each dormitory shou