无线网卡局域网（Wireless LAN）.docVIP

无线网卡局域网（Wireless LAN） 1 first of all, there must be a computer as a host. Wirelessly connect the wired network card and set the network card to a shared state. 2, other settings client, used to obtain its address. Or under configuration. (the basis of interconnection is that each machine has a wireless network card.) This tells the two machine interconnection, in fact, in the company, the network port is insufficient, I will use wireless to achieve more people access the internet. Specific methods are as follows: 1 wireless dual computer interconnect configuration (no routing or no AP, only via wireless network card) First of all, in a computers online neighborhood, right-click on the selected property 1) select the connection to the wireless network card you want to set up, the network connection window, right-click the wireless network card you want to share, and select the property, which will pop up a new window. Set up the TCP/IP property of the wireless network card of the laptop (possibly desktop) in the pop-up window. Set the IP address in the General tab of the wireless network connection property dialog box. Two sets of machines are set to the same network segment, such as 192.168.1.X (X stands for a value, from 0 to 255) and subnet mask is set to 255.255.255.0. 2) select the wireless network configuration tab. Select configure my wireless network settings check with Windows to activate other configuration options below. 3) if you want to add a new wireless network, click the Add button, and open it in the dialog box shown below. Select add button below, the window will pop up, in the name of the service (SSID) to fill in the name of your love, pay attention not to use other computer Chinese, looking for the point to point connection when you see the name, we write grfwgr. Then, in the open page for the relevant settings. The first thing to configure is the wireless network SSID, which must be consistent with the SSID configured by the corresponding wirele