机械制造期末重点复习（Final review of mechanical manufacturing）.doc

下载文档 降价啦

5
0
约7.34千字
约 10页
2017-07-24 发布于河南
举报
版权申诉
保障服务

机械制造期末重点复习（Final review of mechanical manufacturing）.doc

1、本文档共10页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

机械制造期末重点复习（Final review of mechanical manufacturing）

机械制造期末重点复习（Final review of mechanical manufacturing） 1. cutting parameters include: (1) cutting speed. (2) feed quantity. (3) backcutting depth. 2.. A process in which one or a group of workers performs the same process in a single job or at the same time with several pieces of work is called a process. 3. the function of the adjustable support is different from that of the auxiliary support. The former limits the degree of freedom of the workpiece in the process of locating the workpiece, whereas the latter does not limit the degree of freedom. 4., the types of tool wear are divided into: (1) flank wear. (2) flank wear. (3) flank wear. 5. wear process: (1) initial wear stage. (2) normal wear stage. (3) sharp wear stage. 6., the machining process should be divided into those stages: (1) rough machining stage. (2) semi finishing stage. (3) finishing stage. (4) finishing stage. 7. NOUN explanation: (1) production process. (2) process. (3) machining process. (4) manufacturing process 8. NOUN explanation: (1) process. (2) steps. (3) station. 9. the location of the workpiece includes: (1) complete positioning. (2) incomplete positioning. (3) under positioning. (4) over location. 10. the composition of turning tools: (1) rake face (Ar). (2) flank (Aa). (3) sub flank (Aa). (4) main cutting edge (S). (5) negative cutting edge (S). 11. the cutting layer size can be represented by three parameters: (1) nominal thickness of cutting layer (hD). (2) nominal width of cutting layer (bD). (3) nominal cross sectional area (AD) of cutting layer. 12. types of chip: (1) banded chip. (2) pitch chip. (3) granular chip. (4) crushing and cutting chips. 13. the condition of forming lump depends mainly on the cutting temperature. 14., the role of the accumulation of tumor: accumulation of tumor on the benefits of cutting is to protect the edge of the blade, increase the actual work before the corner. The disadvantage is that it causes excessive cutting and intensifies the wear of the rake fa