蝴蝶阀关闭故障分析及处理方法（Butterfly valve closing fault analysis and treatment method）.docVIP

下载本文档

3
0
约9.06千字
约 6页
2017-07-24 发布于河南
举报
版权申诉

蝴蝶阀关闭故障分析及处理方法（Butterfly valve closing fault analysis and treatment method）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

蝴蝶阀关闭故障分析及处理方法（Butterfly valve closing fault analysis and treatment method）

蝴蝶阀关闭故障分析及处理方法（Butterfly valve closing fault analysis and treatment method） Wanfang Data Lin: butterfly valve closed method, fault analysis and processing method in order to prevent siltation interfere with the valve opening, the lower edge of the butterfly valve closed against the flow, hydrodynamic moment M tends to valve closed, the valve dynamic force P water pressure along the flow direction along the direction of flow, the valve is closed, the water valve is completely still. Under hydrostatic pressure. Because of the difference on the valve position, the effect of hydrostatic pressure on the center line, the center of the valve, the valve of the butterfly valve for horizontal shaft, in Qinshan Hydropower Station, the butterfly valve in the fully closed position can not close normally closed, the stress conditions as shown in figure 1. The butterfly valve fully closed when the reference for force analysis, when the valve is fully closed, namely a=90. When the hydrostatic torque Ml=P, L, formula: P. For hydrostatic pressure, P. =ysp. .. S; valve area, S= R / 4 D for mine; valve diameter; water pressure is below the center distance to the axis of rotation of the L=j / SX;., the moment of inertia for water pressure, J= D4 / 64 P. I. maximum hydrostatic pressure (only =90. ). Ml= one =ycrD4 / 64=9.8 (2.8) 4 / 64=2.94 * 103 (N. M). 1.23 * 105 (N. M). 105 (N. M). In the valve operation, there is friction and friction torque at each rotating pin of the operating mechanism. Among them, the friction and torque between the valve shaft and the bush are the main ones, and the numerical value occupies most of the total friction drop and the friction torque. In order to simplify the calculation, this friction force and torque can be considered only, and a small amount of allowance will be added later. 2 / xrF (a), type: elbow. The friction torque for each valve corner; R for the valve shaft radius; m; F. (2) for each valve corner of the valve shaft bushing at the reaction f