apeq-2使用说明书（Apeq-2 instruction manual）.docVIP

apeq-2使用说明书（Apeq-2 instruction manual） APEQ - 2 instructions Connection description: One APEQ - 2 is used for processing the microphone sound field, the following optional connection machine: (1). The microphone (microphone) access mixer, then the mixer output to the APEQ routing group - 2 of the input channel CH1 (CH2), APEQ - 2 CH1 output channels (CH2) and then connected to the console, the console output to the routing level after discharge Big. (2). The microphone (a microphone) connected to the APEQ, 2 - CH1 output channels (CH2) connected to the mixer (or after Scale amplification). (Note: wired microphones are connected to CH1 (CH2) channels, and wireless microphones are connected to CH2 (CH1) to distinguish between different microphone types.) Two APEQ - 2 is used for processing the music field, connections are as follows: (1). To test the microphone access to APEQ - 2 TEST MIC music channel, output is connected to the APEQ - 2 input channel CH1 (CH2), APEQ - 2 CH1 output channels (CH2) connected to a mixer (or amplifier). Two, operation instructions: Fig. control panel As shown above, the 3 buttons on the left are, from top to bottom, Menu, UP, DOWN. The right is a rotatable knob. Note: in general, the UP, DOWN button moves for cursor selection, and the rotation knob for parameter adjustment. 1. boot into the main menu interface. Figure LRSUN APEQ - 2 Channel 1 Archive Channel 2 option 3. press the DOWN button on the left and the cursor stays on channel 1. Figure LRSUN APEQ - 2 Channel 1 Archive Channel 2 option 4. press the right rotatable button to enter the 1 submenu of the channel - gain Channel 1: gain Gain: 0.0dB Status: turn on frequency: open Gain: controls volume size Status: mute control Frequency shift: frequency shifter switch control Five Access channel 1 sub menu - gain interface, you can access The UP DOWN button moves the cursor at the cursor In position, change the setting parameters by rotating the right knob. Press down DOWN button and