TAKSTARBM-620专业界面式麦克风独特的外观是专为工程及技术讲解.docVIP

TAKSTAR BM-620专业界面式麦克风独特的外观是专为工程安装而设计,可放置于桌面或挂在墙壁上。麦克风特别的心型指向，适合会议、教堂、演讲等场合。为配合工程安装，麦克风使用9V-52V幻像电源供电，尾端为标准XLR连接，可与各种设备相匹配。?: 单体:?背极式驻极体指向性:?单指向频率响应:?60Hz-16kHz灵敏度:?-36dB±3dB?(0dB=1V/Pa?at?1kHz)输出阻抗:?200Ω±30%?(at?1kHz) 使用电压：9-52V?幻像电源 频率响应曲线图： 连接线的安装与拆卸: 把卡侬(XLR)插头插入麦克风，，,直至扣键定位。，,同时按压扣键，。: 用手罩住麦克风头部，，，，，，。，，。 麦克风应安装在干燥清洁的地方，，。. TAKSTAR BM-620 with its exceptional flat housing is a professional boundary microphone which is specially designed to be incorporated in different conference projects as well as theatre stages. Due to a small and exquisite modeling the microphone can be hidden in the walls or tables. The microphone applies a standard XLR connector and is powered by 9V-52V phantom in order to match all kind of audio equipment. Specifications: Element: Back Electret CondenserPolar Pattern: Uni-directionalFrequency Response: 60Hz-16kHzSensitivity: -36dB±3dB (0dB=1V/Pa at 1kHz)Output Impedance: 200Ω±30% (at 1kHz)Operating Voltage：9-52V DC Phantom Frequency response graph Connecting and disconnecting the microphone cable: Insert the XLR connector into the microphone. If necessary, rotate the connector to align the key on the connector and the groove in the microphone. Push the connector into the microphone until it clicks. To disconnect the cable and microphone, grasp the connector while depressing the tab. Pull the connector away from the microphone. Usage: If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be generated. To prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker. Due to the high sensitivity of the cartridge, do not drop it from high or apply strong shock to it. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures. ※ The related specification or deployment are subject to change without any prior