采用交互式缝合设置的三维服装模拟技术①-计算机系统应用.PDFVIP

计 算 机 系 统 应 用 2013 年 第 22 卷 第 4 期 ① 采用交互式缝合设置的三维服装模拟技术 陈青青 (莆田学院 电子信息工程系, 莆田 351100) 摘 要: 目前, 国内外对于三维服装试衣技术的研究已逐渐深入, 但对于其中的关键步骤——服装衣片缝合信息 的设置, 却少有成果. 服装的三维效果是通过缝合位于人体前后的二维衣片产生的, 精确及便捷的缝合设置是实 现良好模拟效果的重要步骤之一. 在研究现有的三维虚拟试衣技术的基础上, 提出了缝合信息设定的方法流程, 并实现了交互式缝合设置过程. 在导入二维 CAD 衣片文件后, 经过交互式设置设定各衣片间的对应缝合边, 并 以文件形式保存相关信息, 在试衣阶段通过导入该信息在对应衣片网格顶点间施加缝合力. 经实验, 通过该方法 可以对缝合信息进行准确设置, 使衣片在内外力的共同作用下逐渐变形, 实现虚拟试衣. 关键词: 虚拟缝合; 三维试衣; 衣片缝合; 服装模拟 Three-Dimensional Garment Simulation Technology Based on Interactive Suture Setting CHEN Qing-Qing (Department of Electronic Information Engineering, Putian University, Putian 351100, China) Abstract: Nowadays, the technology of three-dimensional virtual fitting has been gradually deepened both at home and abroad. But there are few result on the setting of garment stitching, which is one of the key processes in simulation. The three-dimensional effect is produced by suturing two-dimensional garments. Accurate and convenient suture set method is one of the important steps to achieve a good simulation effect. Based on the research of current three-dimensional virtual fitting technology, this dissertation proposed a new method to set stitching information and realized the interactive suture setting process. After importing two-dimensional garment files, it can set the corresponding stitched edges through interactive steps, and save these information as files. In fitting process, the system can import these files, according which the system can apply force to the corresponding vertexes. This method can provide accurate stitching information, the garment can deform gradually under the external force and internal force, and the system can reali