Sunnto Zoop的DIY数据线.docVIP

关于Sunnto Zoop的DIY数据线买了个Sunnto Zoop，没带数据线的，问下高手们针对这个表有没有DIY数据线过，翻了以前的帖子，sunnto那2个触动的接口有自己DIY出的，但是看了留的资料文档，制作的都是com的。原装线好象500多，觉得贵了。Sunnto Zoop附带的软件Suunto? Dive Manager是3.1版本的，但是我装了后打开后发觉软件好像也只有com，不是说是支持usb的嘛？如果有支持usb的当然想做跟usb的，在http://homepage.hispeed.ch/scubadiver/english.html看到了老外的DIY制作说明，不过都是支持到Suunto? Dive Manage 2.X版本的有大侠试过的，或者成功做过的，能给贴个技术文档过来吗，谢谢。朋友说具体做这个不难，主要是有技术文档，我在上面那个老外的找了下，大侠看看以下这个技术文档能适用嘛，附件：usb.pdf其中有2个optional的，我没学过电路，其中一个应该是红绿灯的信号指示灯，另外一个不太清楚是什么，自己去买个ft232BM模块后，再根据这个做下应该就行，就是Suunto? Dive Manager到底是否支持usb的数据导入Rolis PC Interface for Suunto? ACW? Dive Computers Build your own DIY dive computer interface to transfer your Spyder?/Stinger data to your PC and present them in the fine (and free) Suunto? Dive Manager logbook software. The final product could look like the one on the picture, below.You can find the DIY instructions as well as a link to download the Suunto? Dive Manager in the download area.The circuit used for the interface described here can be used for the Suunto? computers Cobra, Vyper, Vytec?, Mosquito, D3 as well. See the applications and hints for these computers on the corresponding page. (click on the picture to enlarge) HOT: integrated USB interface, for computers without serial COM port! See the picture gallery of various applications to inspire yourselves with other designs. Rolis USB PC Interface for Suunto? dive computers Pain relief for all the divers with newer notebook computers. These are no longer equipped with serial com ports. To overcome this disadvantage one had to buy a USB-to-serial converter cable. Now there is the integrated USB solution. A completely new schematic using the FTDI FT232BM USB-to-UART controller is reducing in cables and connectors. It is compatible with the original Suunto? Dive Manager logbook software.You can find the schematics and the BOM as well as the layout (Gerber) data in the download links area. There you also find a link to download the free FTDI USB drivers.See the picture