单片机应用PS-2键盘的实例.docVIP

　　单片机应用PS/2键盘的实例|第1 500)this.style.ouseg(this) SMC1602A(16*2)模拟口线接线方式 连接线图: --------------------------------------------------- |LCM-----51 | LCM-----51 | LCM------51| --------------------------------------------------| |DB0-----P1.0 | DB4-----P1.4 | R或11.0592M晶振,实测使用11.0592M] [Keil uV2 7.01编译运行通过 程序中没有做键盘数据的奇偶校验] =============================================================*/ #include #include scancodes.h #define LCM_R_RSP2_1 #define LCM_E P2_2 #define LCM_DataP1 #define Key_Data P3_4 //定义Keyboard引脚 #define Key_CLKP3_3 #define Busy0x80 //用于检测LCM状态字中的Busy标识 void LCMInit(void); void DisplayOneChar(unsigned char X, unsigned char Y, unsigned char DData); void DisplayListChar(unsigned char X, unsigned char Y, unsigned char code *DData); void Delay5Ms(void); void Delay400Ms(void); void Decode(unsigned char ScanCode); void (unsigned char ); void (unsigned char ,BuysC); unsigned char ReadDataLCM(void); unsigned char ReadStatusLCM(void); unsigned char code cdle_[] = {.cdle.--}; unsigned char code email[] = {pnz = 0; //中断次数计数 static unsigned char KeyV; //键值 static unsigned char DisNum = 0; //显示用指针 static unsigned char Key_UP=0, Shift = 0;//Key_UP是键松开标识，Shift是Shift键按下标识 static unsigned char BF = 0; //标识是否有字符被收到 void main(void) { unsigned char TempCyc; Delay400Ms(); //启动等待，等LCM讲入工作状态 LCMInit(); //LCM初始化 Delay5Ms(); //延时片刻(可不要) DisplayListChar(0, 0, cdle_); DisplayListChar(0, 1, email); ReadDataLCM();//测试用句无意义 for (TempCyc=0; TempCyclt;10; TempCyc++) Delay400Ms(); //延时 DisplayListChar(0, 1, Cls); IT1 = 0; //设外部中断1为低电平触发 EA = 1; EX1 = 1; //开中断 do { if (BF) Decode(KeyV); else EA = 1; //开中断 } andLCM(unsigned char ,BuysC) //BuysC为0时忽略忙检测 { if (BuysC) ReadStatusLCM(); //根据需要检测忙 LCM_Data = ; LCM_RS = 0; LCM_R_E = 0; LCM_E = 0; LCM_E = 1; } //读数据 unsigned char ReadDataLCM(void) { LCM_RS = 1; LCM_R_E = 0; LCM_E = 0; LCM_E = 1; return(LCM_Data); } //读状态 unsigned char ReadStatusLCM(void) { LCM_Data = 0xFF; LCM_RS = 0; LCM_R_E = 0; LCM_E = 0; LCM_E = 1; p; Busy);