电路引用A measurement technique to identify and locate partial discharge in transformer with AE and HFCT.pdfVIP

2014 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA) A measurement technique to identify and locate partial discharge in transformer with AE and HFCT Urairat fuangsoongnern Asst. Prof. Dr. Winai Plueksawan Kittimasak Tikakosol Faculty of Engineering Faculty of Engineering Advance Power Equipment Kasetsart University, PEA Kasetsart University Bangkok, Thailand Bangkok, Thailand Bangkok, Thailand urairatf@ winaiplus@ kittimasakt@ Abstract This paper proposes a measurement technique to Causes and effects of transformer damage: The major identify and locate the occurrence of partial discharge cause of transformer insulation deterioration and damage is (PD) in the insulation of high voltage oil immersed the Partial Discharge (PD), which is an incomplete discharge distribution transformer and dry type distribution breakdown. Energy that causes the partial discharge is not transformers. With reference to IEEE Std. C57.127-2007, high enough to make an insulation of the transformer being four acoustic transducers of type PD-TP500A were used conductive throughout the electrode line because an to locate partial discharge and one HFCT (High insulation of one side or both sides of the the electrode, which frequency current transducer) was used to identify partial could be of either solid, liquid or gas type, remains firmly discharge.