电路引用On-line monitoring of insulator contamination causing flashover based on acoustic emission.pdfVIP

DRPT2008 6-9 April 2008 Nanjing China On-line Monitoring of Insulator Contamination- causing Flashover Based on Acoustic Emission C. M. Pei, N. Q. Shu, L. Li, Z. P. Li and H. Peng electromagnetic noise and simple instrumentation; hence Abstract—Conventional electrical measurements of polluted- acoustic methods can be effectively used at site conditions for insulator partial discharge (PD) activity have certain inherent on-line contamination monitoring of insulators. limitations, which have prompted the research of non-electrical Acoustic discharge detection techniques have been studied techniques. An acoustic emission (AE) monitoring method is and developed over a long period, and a substantial body of presented in this paper. When a partial discharge occurs, there is an instantaneous release of energy, some of which is emitted as knowledge has been accumulated. L. E. Lundgaard acoustic energy. Through detecting the sound signals, the demonstrates several applications of Acoustic discharge pollution severities of insulators in-service can be monitored and detection, such as outdoor insulation, gas-insulated accordingly threaten to the insulation of power grid is evaluated. switchgear, capacitor, and etc [3]-[4]. M. Abdel-Salam, S. Therefore preventive steps will be taken efficiently and quickly to Abdel-Sattar, Y. Sayed and M. Ghally used ultraprobe 2000 avoid the happe