滑坡（landslide）.docVIP

滑坡（landslide） The landslide is on the slopes of soil or rock, affected by river erosion, groundwater, earthquake and artificial slope and other factors, under the action of gravity along a weak plane or weak zone, whole or sporadicallyalong natural phenomena to slide down the slope. Commonly known as walking mountain, Hill collapse, landslide, soil slip etc.. Landslide is a slip phenomenon of the rock mass along the shear failure surface. The main component of landslide, landslide mass, refers to the whole sliding part of landslide, which is called slide mass for short; The landslide wall refers to the shape of a wall interface that is exposed to the outside of the landslide behind the back of the landslide; The slip surface refers to the gliding interface of the rock and soil slide along the lower part of the landslide; A slip zone of a parallel sliding surface that is crumpled and sheared, referred to as a slip zone; The landslide bed refers to the underlying rock and soil which is attached to the sliding mass of the landslide, which is called slide bed for short; A landslide Landslide tongue shaped like bulge tongue, slippery tongue short; Landslide step refers to the sliding mass of rock mass and soil, and forms a sort of stepped steps on the surface of landslide; The boundary of landslide refers to the boundary between the landslide and the surrounding rock and soil; Landslide depression refers to the sliding of the landslide between the landslide and the wall of the landslide, forming a trench or a middle low and four high enclosed depressions; The landslide bulge refers to a hillock raised by the resistance at the leading edge of the landslide; Landslide crack refers to a series of cracks produced in the sliding body and its edge when the landslide is moving. In the landslide (after) of arc distribution that tensile cracks; located on both sides of the central sliding body, sliding body and sliding body boundaries are called shear crack; shear cracks and crac