看板管理（Kanban）.docVIP

看板管理（Kanban） A board is a card indicating the amount of material needed for an operation, also known as a subpoena card, as a means of transmitting signals. There are two kinds of Kanban, namely, transportation Kanban and production kanban. The transport Kanban is used to direct the parts to move between two successive processes. When the container for placing parts is transported from the outlet of the upper process to the entrance storage of the next process, the transmission board is attached to the container. When the next process starts using parts in the container at its entry port, the transport board is removed and placed in the Kanban box. When the process requires additional parts, the transmission board is delivered to the corresponding container at the exit of the upper process, and the production Kanban on the container is removed and placed into the production Kanban box. It is obvious that the transmission board is only a reciprocating movement between the exit of the upper process and the entry storage location of the next process. A production Kanban used to direct the production of a work place. It specifies the parts and quantities that they produce. It only goes back and forth between the work area and its export storage. The Kanban is removed and placed in the production Kanban box when the production board is placed on the container from the vendors work place and the vendors work place exit container. The container (filled with parts) is delivered to the entrance storage place of the buyers work, together with the transmission board. According to the order of workers from the production Kanban box removed production Kanban, in accordance with the provisions of Kanban, remove the parts to be machined at the entrance of the store from work, then complete the prescribed number of processing, production Kanban to the container. Kanban management is the production order only for the last process, but not the main production plan according to bill o