粘着型高分子防水层力学特征与防水效能探讨（Mechanical characteristics and waterproof performance of adhesive polymer waterproof layer）.docVIP

粘着型高分子防水层力学特征与防水效能探讨（Mechanical characteristics and waterproof performance of adhesive polymer waterproof layer） Adhesive polymer waterproof layer mechanical characteristics and waterproof efficiency discussion,.Txt marriage is like for free wear piece of cotton padded clothes, activity is not convenient, but it will be very warm. Falling in love is like peeling onions. Theres always a layer of tears going on. National core Chinese periodicals, new building materials, new building materials PQ Mechanical characteristics of adhesive polymer waterproof layer Discussion on water proof efficiency Jiang Yajun, Yang Qixin (Department of tunnel and underground engineering, School of civil engineering, Southwest Jiao Tong University, Sichuan, Chengdu) N!..)! Abstract: by analyzing the typical mechanical properties of polymer materials, the adhesion polymer waterproof material is expanded under the condition of crack propagation along the base The boundary condition is analyzed, and the elastic mechanical model of plane stress and small hole plate stretching is introduced to obtain the stress analytic solution of waterproof layer and waterproof to the crack The forming conditions of the material stripping zone are discussed. The results show that the bond strength between the waterproof layer and the base should be less than the yield strength of the material (...) to be on the base The delamination zone is formed during the crack growth, and the integrity and waterproof performance of the waterproof layer are maintained. In order to ensure the waterproof performance of this kind of waterproof material, we should mainly take measures to reduce it Measures are taken for bonding strength between water layer and base layer, increasing the yield strength and construction quality of the material itself. Keywords: polymer waterproof material; dynamic waterproof performance; mechanical characteristics; peeling off CLC number: *, - documentcode: $article number: ...... /-.01 (0..,).