摩托车保养（Motorcycle maintenance）.docVIP

摩托车保养（Motorcycle maintenance） Knowledge of motorcycle maintenance skills and precautions (1).due to the adjustment and grinding stage of each part of the motor parts of a new car engine, the abrasion quantity is larger and the quality of the grinding is the key to the life of the motorcycle. In the running-in period please strictly enforce the speed limit, limit load, regular maintenance rules, in order to reduce the amount of wear of engine and transmission parts, at the same time also can give full play to your new car performance, prolong the service life of the vehicle. (2). The engine speed changes In the running-in period, engine speed is often change, all the gear to adjust, throttle dont fixed in a certain speed running, its purpose is to make the balanced load components. But do not exceed the required maximum speed. (3). Avoid running the engine at long and low speed when the engine is running at low speed (light load). The lubricating oil pressure is low and the parts are easily worn and mismatched. During the grinding period, the engine can be put into the gear (the scooter can be properly added to the throttle) to accelerate the engine, as long as it does not exceed the specified maximum speed. But the maximum throttle is not available in the first 16OO kilometers. (4) let the engine oil circulate before driving; During the grinding period, the engine should have sufficient idle running time (3-5 minutes) to preheat the engine to all lubrication parts, no matter during the heating machine or the cold machine state. (5). Attention should be given to the engine cooling during the grinding period, when the vehicle should be used to control the running time and avoid long running, one. Every 3O minutes should be extinguished for a while. (6) the first maintenance of the vehicle is of great importance during the first maintenance of the vehicle. The vehicle must complete the first maintenance project, change the oil and oil filter for the first time. Ensure