FISHER_DVC6000定位器调试说明.pdfVIP

Product Bulletin 62.1:DVC6000 September 2003 DVC6000 Digital Valve Controller FIELDVUE DVC6000 Series Digital Valve Controllers FIELDVUE DVC6000 Series digital valve DVC6000 Series digital valve controllers can be controllers (figures 1 and 2) are communicating, used on single- or double-acting actuators. The microprocessor-based current-to-pneumatic digital valve controller receives feedback of the valve instruments. In addition to the traditional function of travel position plus supply and actuator pneumatic converting a current signal to a valve-position pressure. This allows the instrument to diagnose not pressure signal, DVC6000 Series digital valve only itself, but also the valve and actuator to which it controllers, using HART communications protocol, is mounted. This provides you with very cost give easy access to information critical to process effective maintenance information, so that required operation. This can be done using a Model 375 Field maintenance can be performed on the instrument Communicator at the valve or at a field junction box, and valve when there really is a need. or by using a personal computer or a system console within the control room. Using HART Wiring is economical because DVC6000 Series communication protocol, information can be digital valve controllers use two-wire 4 to 20 mA loop integrated into a control system or received on a power. This provides for low cost replacement of single loop basis. existing analog instrumentation. The DVC6000