废塑料在混联法生产氧化铝中应用的燃烧特性研究 the study on the combustion characteristics of waste plastics in alumina manufacturing process with bay-sinter combination method.pdfVIP

·争 热能工程 废塑料在混联法生产氧化铝中应用的燃烧特性研究 李军旗1，王 华2 (1．贵州大学材料科学与冶金工程学院，贵州贵阳550003； 2．昆明理工大学研究生院，云南昆明650093) 摘要：提出了煤与废塑料共熔后在混联法生产氧化铝的烧结系统中作为燃料应用。对不同比例的废塑料与煤粉混合，在200℃混熔 温度下制成样品进行燃烧特性试验；并分析混联法生产氧化铝的烧结系统中煤粉燃烧工艺。结果表明：混熔样品具有良好的燃烧性 能，开始燃烧温度和激烈燃烧温度都比煤粉低，塑料的存在对煤有提前燃烧作用，废塑料混熔比例在25％时燃烧时间较煤粉短，燃 烧速度快，废塑料与煤混合在氧化铝烧结系统中应用技术上是可行的。 关键词：废塑料；煤；氧化铝；燃烧特性 中图分类号：TQ322．2；TKl6文献标识码：A 文章编号：1002—1639(2006)04-0001-05 The ontheCombustionCharacteristicsofWastePlasticsinAlumina Processwith Study Manufacturing CombinationMethod Bay-sinter LI Hua2 Jun—qil，WANG Sciencea (1．Material University，Guizhou550003，China； MetallurgyEngineeringColedge，Guizhou 2．TheSchoolofGraduate ofScienceand 650093，China) KunmingUniversity Technology,Kunming waste withcoalwas touseasfuelinalumina with Abstract：The plasticspre—melted proposed manufacturingprocessBay-sinter methodinthearticle．Thenthecombustion ofwaste was withcoal at200。Cindifferentblend experimentsplastics，whichpre—melted powder carriedoutandtheheatcharacteristicsofcoalandwaste were resultsshowedthatthe percentages，were plasticsinvestigated．The dur- had combustion the ofonset and werelower thanthose samplesgood characteristics，andtemperaturesburningrapidburning respectively thecombustionofcoal waste could thecombustioncharacteristicsofcoalandthecombustionbecameeasier alone．The ing plasticsim