opencv使用.docVIP

LINUX 下编译opencv… 第一解压缩opencv的压缩包。。。 第二为了避免麻烦，用CMAKE来安装opencv Sudo apt-get install cmake Sudo apt-get install cmake-qt-gui 执行完两个sudo后，直接在命令行输入命令：cmake-gui 弹出对话框 注意：要把/usr/local/include/opencv 拷贝到/usr/include 然后把里面的头文件全部再次拷贝到/usr/local下。。。这个编译器才能默认的找到这些头文件。。。 HighGUI configuration ================================================ Windowing system -------------- Use Carbon / Mac OS X: no Use gtk+ 2.x: no 收索gtk+ 实际：libgtk2.0-dev Use gthread: no liblogthread-dev Image I/O --------------------- Use ImageIO / Mac OS X: no Use libjpeg: yes Use zlib: yes Use libpng: yes Use libtiff: no libtiff4-dev Use libjasper: no libjasper-dev Use libIlmImf/OpenEXR: no Video I/O --------------------- Use QuickTime / Mac OS X: no Use xine: no Use gstreamer: no Use ffmpeg: no Use dc1394 raw1394: no Use dc1394_v2 raw1394: no Use v4l: yes Use v4l2: yes Use unicap: no Wrappers for other languages ========================================= SWIG Python no Octave no Additional build settings ============================================ Build demo apps no Now run make ... 开发板上/etc/init.d/rcS的内容 #! /bin/sh :/bin:/usr/sbin:/usr/bin:/usr/local/bin: runlevel=S # /bin/hostname FriendlyARM /bin/mount -n -t usbfs none /proc/bus/usb /bin/mount -t ramfs none /dev echo /sbin/mdev /proc/sys/kernel/hotplug