不同介质结构电容应用.docVIP

不同介质结构电容的应用 它的特点体积较小，容量可以做得较大。但是有固有电感和损耗都比较大，用于低频比较合适。用两片金属箔做电极，夹在极薄的电容纸中，卷成圆柱形或者扁柱形芯子，然后密封在金属壳或者绝缘材料（如火漆、陶瓷、玻璃釉等）壳中制成。它的特点体积较小，容量可以做得较大。但是有固有电感和损耗都比较大，用于低频比较合适。 Made from two pieces of metal foil electrodes, the capacitance of the thin paper, rolled into a cylinder or flat cylindrical core, and then sealed in a metal shell or insulating materials (such as wax, ceramic, glass glaze, etc.) made in the shell. Its characteristics of small volume, large capacity can do. But there are inherent inductance and loss is bigger, is suitable for low frequency. 用金属箔或者在云母片上喷涂银层做电极板，极板和云母一层一层叠合后，再压铸在胶木粉或封固在环氧树脂中制成。它的特点是介质损耗小，绝缘电阻大、温度系数小，适宜用于高频电路。　 Using metal foil or spraying silver layer on the mica sheet electric plate, plate and mica after a layer of a layer, then die casting in the bakelite powder or cementing in epoxy resin is made. It is characterized by low dielectric loss, insulation resistance, temperature coefficient is small, suitable for high frequency circuit. 用陶瓷做介质，在陶瓷基体两面喷涂银层，然后烧成银质薄膜做极板制成。它的特点是体积小，耐热性好、损耗小、绝缘电阻高，但容量小，适宜用于高频电路。铁电陶瓷电容容量较大，但是损耗和温度系数较大，适宜用于低频电路。结构和纸介电容相同，介质是涤纶或者聚苯乙烯。涤纶薄膜电容，介电常数较高，体积小，容量大，稳定性较好，适宜做旁路电容。它由一组定片和一组动片组成，它的容量随着动片的转动可以连续改变。把两组可变电容装在一起同轴转动，叫做双连。可变电容的介质有空气和聚苯乙烯两种。空气介质可变电容体积大，损耗小，多用在电子管收音机中。聚苯乙烯介质可变电容做成密封式的，体积小，多用在晶体管收音机中。聚苯乙烯薄膜电容，介质损耗小，绝缘电阻高，但是温度系数大，可用于高频电路。　 Made from ceramic media, on the two sides spraying silver layer ceramic substrate, and then burned into silver do plate made of thin film. It is characterized by small volume, good heat resistance, low dissipation factor, high insulation resistance, but the capacity is small, suitable for high frequency circuit. Ferroelectric ceramic capacitor capacity is bigger, but losses and wide temperature coefficient, is suitable for low frequency circuits. Structure is the same as the paper medium is polyester or polystyrene. Polyester film capacitor, high dielectric constant, small volume, large capacity, good stability, suitable for the bypass capacitor. It consists of a set of chip