2009年b3~b4卷（2009 Vol b3~b4）.docVIP

2009年b3~b4卷（2009 Vol b3~b4） National work permit test for electrical access network High pressure theory examination questions (2009 B3) A single choice (optional for each question, only one of the most to do a wrong, each question, the election or not is 0 points, a total of 40 points) 1. The insulation level of the electrical equipment in the neutral point direct grounding system shall be considered in accordance with (A) A phase voltage B 20. 5 phase voltage C 30. 5 phase voltage 2, the generation of harmonic in power system mainly lies in the existence of power system (C) A inductors and capacitors, B, three-phase parameters, asymmetrical C, nonlinear components 3, transformer rated current refers to the transformer winding line end (C) A rated maximum current B rated phase current C rated line current 4, the two side of the transformer without load, the primary side and the grid (C) voltage regulation is called no excitation voltage regulation When B is connected in parallel, C is disconnected when A is turned on 5, the long-distance transmission of electrical energy, first of all, the generator output voltage (B) increased to tens of thousands of volts or hundreds of thousands of volts, in order to reduce the transmission line energy consumption A step-down transformer, B step-up transformer, C self coupling transformer 6 、 current transformer is divided into measuring current transformer and (C) according to its use Current transformer for A charging, current transformer for B insulation, current transformer for C protection 7. The temperature rise of an air cooling transformer is the difference between the temperature of the measured part of the transformer and (B) A winding minimum temperature B, cooling air temperature, C winding average temperature 8, the power transformer according to cooling medium is divided into (C) and oil immersed two kinds A air-cooled B self cooled C dry type 9, the generator generator output voltage is usually 6.3KV, (A), the max