06矿山（06 mines）.docVIP

06矿山（06 mines） In 2006, single choice questions (20 questions). 1 points for each question. Each item options, only 1 of the most to do) 1. the determination of the wellhead location and the well completion must be based on the establishment of the B near the wellhead. A. triangle control network and loop control network, B. plane control point and elevation control point, C. horizontal control distance and azimuth angle, D. plane coordinate and coordinate azimuth angle 2. about the strength of concrete, the correct description is (C). The concrete strength grade of A. is according to the compressive strength of the component value of B. to determine the water cement ratio is larger, more coarse sand and stone aggregate, the higher the strength of concrete using C. steam curing method can improve the early strength of concrete D. concrete strength and medium environment humidity and temperature independent About 3. of the material strength and stiffness, the right is (C). The stiffness and strength of A. material, the greater the intensity, stiffness is B. high stress conditions of surrounding rock, the greater the intensity, reflecting the better stability of C. strength is the ability to resist damage, while the stiffness of said material deformation resistance stiffness of D. is reflected in the material the size and shape of the ability to remain unchanged under any conditions 4. about the basic requirements of component connection, the point of view is correct (C). The basic principle of A. component is connected to the node stiffness should meet the design requirements with B. reinforced concrete members should adopt rigid connection of steel structure C. the weld connection of steel materials require higher D. in seismic region, wooden structure member connection should use cemented connection 5., about the new Austrian engineering monitoring, the point of view is correct (D). A. project monitoring as an important part of NATM technology, the velocity in the