pe制作（PE production）.docVIP

pe制作（PE production） WinPE (pre installed Windows environment, WindowsPreinstallationEnvironment), operating in protected mode under the WindowsXP version of the kernel based on the individual, with only a few (but very core) Win32 subsystem service. These services install, implement network sharing, automatically process the underlying processes, and implement hardware validation for the Windows. WinPE allows you to create and format hard disk partitions and give you access to the NTFS file system partition and internal network. This pre installed environment supports all large capacity storage devices that can be driven by Windows2000 and WindowsXP, and you can easily add drivers for new devices. The use of WinPE can help you to convert existing tools for MS-DOS based on 32 bit WindowsAPIs, so that you in the standard development environment (such as Microsoft VisualStudio) more easily maintain these applications. The hardware diagnostics and other pre installed tools included in the WinPE support standard WindowsXP drivers, and you dont need to do any other special work. For program developers, you can focus on the diagnosis, debugging, and development of the program. So today, lets talk about how to make the U disk PE system. 1. what you need is available: The U disk startup disk tool is uFormat 128M U disk, one I use here is SD 2., the lower part, step by step, teach you to make WINPE specific steps: 1). Run uFormat, USB-HDD; select U disk (if the U disk is divided into 2 areas, then select the first area), click click Select mode, select HDD model, then click start, then follow the prompts to pull and insert U disk, until the completion of. Select OK At this point, prompted the safe pop-up U disk, and then plug in the U disk After inserting again, you can see that you are writing, and then complete the prompt to start the U disk successfully. Quit uFormat. 4) open the U disk to view the hidden file COMMAND.COM IO.SYS MSDOS.SYS 5) will download from the USB-HDD-