钻进技术员应全面、严格按设计要求进行施工.docVIP

钻进技术员应全面、严格的按设计要求进行施工 Drilling technician should be comprehensive, strict according to the requirement of design and construction 　　　设计包括地质设计、工程设计（包括泥浆设计）建井周期设计和成本预算。 Design includes geological design, engineering design ( including slurry design ) well construction cycle design and cost budget. 　　　设计是施工的标准书、施工的程序书。任何一项工程施工都应当有认真的科学的设计，施工必须严格按设计要求进行，为此 Design standard, construction procedures. Any project construction should have the scientific design of the serious, the construction must be carried out strictly according to design requirements, therefore 　　　1、全面掌握设计内容 1, a comprehensive grasp of the design content 　　　了解全部设计内容，熟悉设计中所涉及到的各个方面，不仅要注意大项，还要注意细节。不能断章取义，更不能各取所需，有时一个注解，对全井施工也是非常重要的。例如在分层泥浆使用中，除有一图表外，还有一条旁注中说明要提前 米加重，不注意此条要求，往往会造成恶果。 Know all the design content, familiar with the various aspects relating to the design, not only to pay attention to sports, but also pay attention to details. Cannot interpret out of context, the more cannot each takes what he needs., sometimes a note, is very important to the whole well construction. For example in the stratified mud in use, in addition to a chart, and a marginal notes that to advance Mega heavy, do not pay attention to this requirement, often can cause. 　　　2、吃透各项设计内容的精神，领会设计的本来意图，只有这样才能真正执行设计。例如在套管下入深度的要求上，总有一个具体的数据表示，但它的目的是封某一地层或某一个必封的井段，由于地层深度和设计有出入，地层可能提前错后，都要密切注意，不能盲目的只考虑深度而忽略地层，否则就要吃亏。 2, understand the design content of the spirit, understand the design intent, the only way to truly implement the design. For example, in the casing depth requirements, there is always a concrete representation of data, but it is designed to seal a formation or one will be sealed well, because the access stratum depth and design, formation could be wrong, should pay close attention to, not blindly only consider the depth while ignoring the formation, otherwise you will lose. 　　　3、为贯彻设计要求而创造条件和做好准备。 3, in order to carry out the design requirements and to create the conditions and the ready. 从搬上一口井，就要随时按设计要求去准备工具、器材及技术上应进行的安