瓷砖施工注意事项（Notice of ceramic tile construction）.docVIP

瓷砖施工注意事项（Notice of ceramic tile construction） The preparation process of cement mortar paving with glazed tile and floor tile: 1. materials preparation including ceramic tile, base material, leveling material and adhesive material. 2, paving tool preparation ---- safe and good tool is the guarantee of smooth construction. 3, the basic cleaning - --- the surface of the base of the adhesive strength of loose objects, dust and oil stains removed. 4, on the base for the purpose of enhancing the leveling layer, tile bonding layer on the wall and ground adhesion strength. 5, wipe leveling layer ---- find the reference plane, to ensure tile surface laying smooth. 6, the bullet line separation ---- draw line pre row, determine each tile paving reasonable position. 7, stick tiles. 8. Cut seam, wipe seam and clean tile surface (seamless brick and glazed tile need not leave seam). 9, maintenance. 2, glazed tile ground construction process: 1. First clean the site and clean the surface of the concrete to avoid the influence of impurities; 2. at the site of construction, measure the highest horizontal points, with this point on each wall (do not remove the bump, the mortar can not be lowered more than 6cm); 3, preparation of powder cleaning cement, sand 1:4 ratio and glue (e.g. 107 glue), cement paste, hydromorphic soil water; 4. Sprinkle some water on the ground first; 5. Sprinkle cement powder on the ground before construction; 6, and sweep evenly with broom, in order to increase the adhesion of the ground layer and cement mortar; 7, began to put the first row datum, each 1 square meters area, dry sand cement material with smooth wood trowel; 8, tile placed on the smooth cement sand, with the gavel, the level is confirmed, then dig the tile view grout lines, if not full, then fill the mud and sand. 9, dial (water / cement paste and seaweed powder and water) to dry up the hydration of cement mortar. 10, put on just have good tiles to gavel flat, to confirm the level to complete