建筑施工之施工项目竣工验收及回访保修（Construction project completion acceptance and return visit warranty）.docVIP

建筑施工之施工项目竣工验收及回访保修（Construction project completion acceptance and return visit warranty） This article is contributed by Dwyane pineapple Luo DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Construction of the completion of the project acceptance and return visit, maintenance, construction of the construction project completion acceptance and return visit warranty 31-13-1 completion acceptance of construction project 31-13-1-1 conditions and standards for final acceptance of construction projects 1. construction project completion and acceptance conditions according to the Regulations provisions of article sixteenth of the quality management of construction projects, the completion of the construction project shall meet the following conditions: (1) the completion of the construction design and the provisions of the contract; (2) a complete technical archives and construction management data; (3) the main building materials used in engineering did test report, construction parts and equipment; (4) a survey, design, construction, quality engineering supervision units signed documents; (5) unit signed a construction project quality warranty. 2. construction project completion acceptance standard acceptance standard of construction project in one of three ways: (1) production or research of construction project acceptance criteria: Civil Engineering, electrical, water, warm, sanitation, ventilation Engineering (including outdoor pipeline) and belongs to the building control part of the room, operating room, The equipment foundation, between life and the chimney, have been completed, the only process equipment is not installed, can be regarded as the housing contractor work reaches completion standards, can carry out inspection and acceptance. The basic concept of this type of construction completed is: once the process equipment installation, commissioning and can be