Commissioning A Practical Approach - （调试一个实用的方法）.pdfVIP

PDHonline Course P146 (2 PDH) Commissioning Fundamentals and a Practical Approach Instructor: Timothy D. Blackburn, MBA, PE 2012 PDH Online | PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone Fax: 703-988-0088 www.PDH www.PDH An Approved Continuing Education Provider www.PDH PDH Course P146 www.PDH Commissioning Fundamentals and a Practical Approach Timothy D. Blackburn, MBA, PE Introduction Have you ever had something not to work but only discovered long after start-up? Do you have an uneasy feeling that something might not be installed correctly, but don’t know how to verify? Then try commissioning. Actually, Commissioning is nothing new. What good engineer would not confirm an installation works? But if commissioning is documented poorly, it is inadequate. If it is done improperly, it is inadequate. Projects routinely have problems. One part of the solution to minimizing project problems is to have a robust and documented Commissioning process (assuming the design is robust in the first place). However, we can go to far and judge success by the weight of the paper generated. How can Commissioning be implemented meaningfully in the real world? This course will attempt to answer this question. The Author has been a leader in the Pharmaceutical industry in the application of documented Commissioning to minimize the regulated paperwork required for Validation/Qualification. He shares his learned experience in this course in the practical application of commissioning, whether