Finite Element Analysis of a Cantilever Beam - 3DS（悬臂梁的有限元分析,3 ds）.pdf

Finite Element Analysis of a Cantilever Beam (Eigensolution – Solid Model) Programs Utilized: Abaqus/CAE Student Edition 6.10-2 Problem Description: This tutorial illustrates how to build and compute a frequency analysis of an aluminum cantilever beam. Finite element models using solid elements will be analyzed. A subsequent tutorial completing the same example using beam elements can be found at /learning. The pre-processing program used is Abaqus/CAE Student Edition 6.10-2, and Abaqus command is used for the analysis. The geometry and material properties of the cantilever beam section are shown in Figure 1 and Table 1, respectively. Figure 1. Beam Dimensions and BC’s Property Value L (m) 1.0 t (m) 0.05 w (m) 0.2 Elastic Modulus (Pa) 73x109 3 Density (kg/m ) 2700 Poisson’s Ratio 0.3 Table 1. Corresponding Dimensions and Material Properties Download tutorials and more in the SIMULIA Learning Community: /learning Tutorial Created by: Dimitri Soteropoulos SIMULIA Cantilever Beam Tutorial (Solid Model) © Dassault Systèmes, 2011 SIMULIA Learning Community 2 Creating the Model Geometry (Solids) Go to the Start Menu and open Abaqus CAE You may be prompted with a