数控电气作业（CNC electrical work）.docVIP

数控电气作业（CNC electrical work） 1. what are the functions of the push button switch and the stroke switch? How to determine the button switch selection principle? Answer: the button switch is usually used as a short time to connect or disconnect the switch current control circuit, a control circuit for a start or stop command through the contactor, relay control appliances to connect or disconnect the main circuit. The travel switch is also called a limit switch, which is an automatic control device for switching the circuit according to the position of the moving part. During operation, the block is collided with the roller of the travel switch, and the contact is switched on or off to control the movement direction, the stroke size or the position protection of the moving component. Selection principle of push button switch Select the form of switch according to the use, such as emergency, key, indicator, etc.. According to the use of environment, select the types of button switches, such as open, waterproof, anti-corrosion and so on. According to the working status and requirements of the work, select the color of the button switch. 2. what is the function of low voltage circuit breaker in the circuit? Answer: low voltage circuit breaker is also called automatic air switch, it can be used not only for normal working hours frequently do not connect and disconnect the circuit when the circuit overload and short circuit voltage loss or failure, can automatically cut off the circuit, effectively protect the cascade behind it in electrical equipment, therefore, low voltage circuit breaker in machine tool used more and more widely. 3. what is the purpose of the contactor? What parts does it consist of? Answer: contactor is one of the main circuits for automatic control of electrical appliances that are frequently connected or broken with loads (such as motors). The contactor is divided into two kinds of alternating current and direct current through its main contact curren