炭素回转窑内物料停留时间的确定 - Journal of Northeastern University.PDF

第31 卷第9期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol31, No. 9 2 0 10 年 9 月 Journal of Northeastern U niversit ( Natural Science) Sep. 2 0 1 0 1 2 陈文仲 , 王春华 ( 1. , 110004; 2. , 113001) : , ; , ; , , , , , : ; ; ; ; : T F 062 : A : 1005-3026( 2010) 09- 1313-05 Calculation of Mean Residence Time of Solids in Carbon Rotary Kilns 1 2 CH EN Wen-z hong , WAN G Chun-hua ( 1. School of Materials Metallurg , Northeastern Universit , Shen ang 110004, China; 2. College of Petroleum and Gas Engineering, Liaoning Shihua Universit , Fushun 113001, China. Correspondent: WANG Chun-hua, E-mail: chunhua07 @ ahoo. com. cn) Abstract: Based on the earlier works concerning the formula of the change in the ax ial depth of a bed in a diameter-invariable rotar kiln, the formula of ax ial depth of bed in a diameter-variable kiln w as deduced to adapt to the diameter enlargement at kiln inlet and the turn-dow n rigs set on the kiln lining. Then, the formulae of mean residence time of solids in both diameter-invariable and diameter-variable kilns w ere deduced, w here several factors w ere taken into account, such as the inner diameter, total length, discharge dam height, axis inclination and rotation speed of kiln mass feed rate of solids, and the particle diameter and d namic angle of repose of solids. Cold- state experiments w ere carried out on a laborator rotar kiln to verif the formulae proposed, and the results showed that calculated results of the residence time of solids are basicall in agreement w ith the experimental values, w ith no correction coefficient required beause of small errors. Key words: carbon