京瓷复印机维修代码（KYOCERA copier maintenance code）.docVIP

京瓷复印机维修代码（KYOCERA copier maintenance code） KYOCERA copier maintenance code, and code (all) Maintenance code: Entry mode isexit, press 001 copy key U000 output self status report- U001 quit maintenance mode- U004 check machine numbers- U005 no paper copy- U019 displays the ROM version- U020 initializes all data- U021 initializes memory- U030 check motor operation- U031 checks the paper transfer switch- U032 check clutch operation- U034 sets the image print alignment #8226. Adjust front end alignment 5.1/0/0/0/0/0 ? adjust midline -1.2/0/0/0/0/0 U035 sets the folio size ? length 330 ? width 210 U051 adjust paper tightness 20/0/70/80/80/0 U053 trim motor speed ? drive motor speed regulation 0 ? multilateral motor speed regulation 0 ? speed adjustment of the paper motor 0 ? speed regulation of the counter roller motor 0 ? motor speed adjustment (for hand feed paper feed) 0 ? motor speed adjustment (for the purchase of paper supplied in the carton) 0 ? motor speed regulation (double sided mode) 0 U060 adjust scanner input characteristic 12 U061 turn on the exposure light- U063 adjust the shade position 0 U065 adjust scanner magnification ? main scan direction 0 ? sub scan direction -12 U066 adjust the front end alignment to the manuscript 10 on the scanner glass U067 adjust the center line to scan the manuscript on the stage glass. 0 U068 adjusts the scanning position of the manuscript of the manuscript feeder 0 U070 adjust the magnification of the manuscript feeder 0 U071 adjusts the scanning position of the send writer #8226. Adjust front end alignment 0 ? adjust back position alignment 0 U072 adjust the feeder line 0 U073 check scanner operation- U074 adjust the input brightness of the manuscript feeder 1 U087 turn on / off the scanner position adjustment mode 35 U088 sets the input filter (moire fringe reduction mode) off U089 output MIP-PG pattern- U091 check the shading- U092 automatic adjustment scanner- U093 sets the exposure concentration level ? text