LCD驱动代码2.doc

LCD驱动主要程序如下： #ifdef CONFIG_PM #include linux/pm.h #endif #include mys3c2410fbdata.h #define CONFIG_FB_S3C2410_DEBUG /* Debugging stuff */ #ifdef CONFIG_FB_S3C2410_DEBUG static int debug = 1; #else static int debug = 0; #endif #define dprintk(msg...) { printk(KERN_ALERT s3c2410fb: msg); } /*FrameBuffer设备名称*/ static char driver_name[] = s3c2410_lcd; /*定义一个结构体用来维护驱动程序中各函数中用到的变量*/ struct s3c2410fb_var { int lcd_irq_no; /*保存LCD中断号*/ struct clk *lcd_clock; /*保存从平台时钟队列中获取的LCD时钟*/ struct resource *lcd_mem; /*LCD的IO空间*/ void __iomem *lcd_base; /*LCD的IO空间映射到虚拟地址*/ struct device *dev; struct s3c2410fb_hw regs; /*表示5个LCD配置寄存器，s3c2410fb_hw定义在mach-s3c2410/include/mach/fb.h中*/ /*定义一个数组来充当调色板。据数据手册描述，TFT屏色位模式为8BPP时，调色板(颜色表)的长度为256，调色板起始地址为0x4D000400*/ u32 palette_buffer[256]; u32 pseudo_pal[16]; unsigned int palette_ready; /*标识调色板是否准备好了*/ }; /*用做清空调色板(颜色表)*/ #define PALETTE_BUFF_CLEAR (0 /*填充调色板*/ static void s3c2410fb_write_palette(struct s3c2410fb_var *fbvar) { unsigned int i; void __iomem *regs = fbvar-lcd_base; fbvar-palette_ready = 0; for (i = 0; i 256; i++) { unsigned long ent = fbvar-palette_buffer[i]; if (ent == PALETTE_BUFF_CLEAR) { continue; } /* #define S3C2440_ADDR(x) ((void __iomem __force *)0xF0000000 + (x)) #define S3C24XX_VA_LCD S3C2440_ADDR(0 #define S3C2440_LCDREG(x) ((x) + S3C24XX_VA_LCD) #define S3C2440_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) */writel(ent, regs + S3C2440_TFTPAL(i)); if (readw(regs + S3C2440_TFTPAL(i)) == ent) { fbvar-palette_buffer[i] = PALETTE_BUFF_CLEAR; } else { fbvar-palette_ready = 1; } } } /*LCD中断服务程序*/ static irqreturn_t lcd_fb_irq(int irq, void *dev_id) { struct s3c2410fb_var *fbvar = dev_id; void __iomem *lcd_irq_base; unsigned long lcdirq; /*LCD中断挂起寄存器基地址*/ lcd_irq_base = fbvar-lcd_base + S3C2440_LCDINTBASE; /*读取LCD中断挂起寄存器的值*/ lcdirq = readl(lcd_irq_base + S3C2440_LCDINTPND); /*判断是否为中断挂起状态*/ if(lcdirq S3C2440_LCDINT_FRSYN