DSP28335串口通信实验.docxVIP

// main函数#includeDSP2833x_Device.h// DSP2833x Headerfile Include File#includeDSP2833x_Examples.h// DSP2833x Examples Include File#includesci.h#define NUM 10// Prototype statements for functions found within this file.voidSCI_Operation();voidSCIA_Operation(void);voidSCIB_Operation(void);voidSCIC_Operation(void);voidsci_config_init(void);voidscia_config_init(void);voidscib_config_init(void);voidscic_config_init(void);voidSCI_FIFO_Init(void);voidSCIA_FIFO_Init(void);voidSCIB_FIFO_Init(void);voidSCIC_FIFO_Init(void);voidSCIA_Character_Send_Msg(char character);voidSCIB_Character_Send_Msg(char character);voidSCIC_Character_Send_Msg(char character);voidSCI_Send_Msg(char *message);voidSCI_Send_Msg_Count(char count,char *message);charSCI_Receive_Buff();charSCIA_Receive_Buff(void);charSCIB_Receive_Buff(void);charSCIC_Receive_Buff(void);char *msg=\r\nHello YanXu!\0;char *message1={ \r\nlearner the scic!\0};char ReceivedChar;char LoopCount =0;voidmain(void){ InitSysCtrl(); Init_SCI_Gpio(); InitXintf16Gpio(); DINT; InitPieCtrl(); IER = 0x0000; IFR = 0x0000; InitPieVectTable(); SCI_FIFO_Init();// Initialize the SCI FIFO sci_config_init(); // Initalize SCI for echoback SCI_Send_Msg(msg); SCI_Send_Msg_Count(NUM,message1); msg = \r\nYou will enter a character, and the DSP will echo it back! \n\0; SCI_Send_Msg(msg);while(LoopCount++10) { SCI_Operation(); }}voidSCI_Operation(){#if (DSP2833x_SCI_A) SCIA_Operation();#endif#if (DSP2833x_SCI_B) SCIB_Operation();#endif#if (DSP2833x_SCI_C) SCIC_Operation();#endif}voidSCIA_Operation(void){ msg = \r\nEnter a character: \0; SCI_Send_Msg(msg); ReceivedChar = SCIA_Receive_Buff();// Echo character back msg = You sent: \0; SCI_Send_Msg(msg); SCIA_Character_Send_Msg(ReceivedChar);}voidSCIB_Operation(void){ msg = \r\nEnter a character: \0; SCI_Send_Msg(msg); ReceivedChar = SCIB_Receive_Buff();// Echo character back msg = You sent: \0; SCI_Send_Msg(msg); SCIB_Character_Send_Msg(