查询AN3726供应商捷多邦,专业PCB打样工厂,24小时加急.PDFVIP

查询AN3726供应商 捷多邦，专业PCB打样工厂，24小时加急出货 GDU 9X-XXXXX Series GDU 9X-XXXXX Series GTO Gate Drive Units Application Note Replaces March 1998 version, AN4571 - 5.1 AN4571-6.0 January 2000 This application note should be used in conjunction with individual Gate Drive Unit datasheets which contain electrical, timing and outline information. GTO GATE DRIVE UNITS A range of Gate Drive Units (GDU) is available to control Dynex Semiconductor Gate Turn-Off Thyristors (GTO). These units provide the recommended waveforms for reliable switching of GTOs and have the following features:- Input signal to the GDU (to turn the GDU ON and OFF) or output Each power supply voltage is continuously monitored, if it falls signal (that indicates the presence of GTO gate to cathode below a preset level an OFF signal is sent to the GTO and further negative voltage) can be specified for either opto-couplers or fibre ON pulses are inhibited until the power supply recovers. optics. Adjustable inhibit of short ON pulses. This prevents the GTO An output signal that monitors the GTO gate to cathode negative switching ON from signals that may be false. voltage. This voltage is monitored at the GDU GTO gate output connections or the GTO gate sense leads if they are wired to the Adjustable minimum ON pulse width. This ensures that when the GDU.