怎样建模板（How to build templates）.docVIP

怎样建模板（How to build templates） Teach you to do SW engineering drawing template A template is a set of documents (drawing, template engineering drawing template, template assembly), when using the new parts, assembly, or engineering drawings, SW will be based on the system attributes and the attributes of the file template is set to build parts, assembly, or engineering drawings. Modifying templates can also personalize SW settings and maintain conformity with GB. The extension of the part template is: *.prtdot, and the extension of assembly template is: *.asmdot, engineering drawing template: *.drwdot. In SW, the default save location for the template is: crogram, FilesSolidWorksdata, emplates. (default installation path crogram FilesSolidWorks). The default templates for the SW program are: parts.Prtdot, assembly.Asmdot, engineering drawings,.Drwdot. How do you modify parts templates, assembly templates, and engineering drawing templates? To create a part template, for example, create a new part, and then modify the tools - options in the system options and file properties in the relevant parameters, to achieve their own satisfactory results. You can also set views and other settings. In the tools - Options - system options there are many related parameters, including various color settings, modify these settings can make SW the default color in line with their own preferences, so as to achieve the objective of personality. In the tools options - file properties, you can modify some SW program identification and annotation samples. Modifying these settings can make SW more in line with GB requirements. If you can change the size, arrow, font and so on in the detail drawing. Dont forget to save the template after youve finished. Because SWs expansion and ease of use are very strong, so. Suggest that you set up the file - save as, click save type drop-down box, select the appropriate template extension (parts.Prtdot,.Asmdot, assembly drawing.Drwdot), save to the new f