氙气灯 缺点（Xenon lamp fault）.docVIP

氙气灯 缺点（Xenon lamp fault） Hiding in since the market can be said to be different, the ultra high capacity lighting which greatly reduces the risk of transportation, but without a proper design of the product, but for the formation of a great car has been the threat of recession, color temperature, failure rate, life is not long, about the network complaints, we will tell you the real reason for these shortcomings is. The serious problem of glare is actually the manufacturers mistake Network, in the discussion, the pile of people on the lane, HID lights can not see the traffic in front of themselves! In fact, I have similar experience, but why the original configuration of the HID lamp does not have this problem? HID lighting manufacturer is not dazzling, even brighter than the lighting range, hidden smart market, in addition to differences in design of HID lamp halogen lamp, the general body of the most important reason is the theory of HID set most of the manufacturers do not make the product quality work. HID and halogen light light is by this point, everyone should have heard different, because the burning of halogen tungsten lamps based on the production of filaments, while HID is the arc burning jump the iodine light. The former is designed for straight plate shaped tungsten wire, while the latter shows the arc of the state (high emission will be a surplus of 0.5mm), the light uniformity and color temperature are very different tungsten burning issued light all around 3000K is yellow, but the top of the light HID lamp is a high color temperature white light light, must be more as a result of halogen gases, also showed excellent low temperature yellow. Although the two optics The type is different, but if the bulb axis is positioned correctly, the extent to which the light is converted into the reservoir remains in acceptable range. But the premise is that the light axis of the bulb must be accurately placed in the light at the center of the light. The higher the