如何选择火花塞（How to choose spark plugs）.docVIP

如何选择火花塞（How to choose spark plugs） It is more important to choose the spark plug with the correct calorific value than the precious metal spark plug ZT This article from: 566 riders forum Author: no oxygen cylinder date: 2009-8-13 12:04 reading: 514 people print collection If you want to please see below that in changxin. If the data from the view, iridium spark plugs (Iridium) melting point is about 2400 degrees Celsius, higher than platinum spark plugs 700 DEG C, hardness and corrosion resistance than platinum spark plug more than six times stronger. Depending on the alloy proportion, adding rhodium (Rhodium), melting point and hardness can be further improved. Due to the high melting point of iridium alloy, corrosion resistance is strong, so the diameter of the electrode pads allow further narrowed, platinum by the spark plug 1.1mm is reduced to 0.4-0.7mm, the spark effect is more concentrated, the required voltage can be decreased. A number of manufacturers have claimed that the iridium spark plug in the combustion chamber, demanding, more stable to improve combustion effect, the result is to increase horsepower, and reduce the carbon deposition inside the engine component, so durable, etc........ If your engine is turbocharged, or Super-Charge engines, using iridium alloy Tsui will make the performance more stable. On a motorcycle, manufacturers suggest that the life span is about thirty thousand kilometers. If your motorcycle engine has a high compression ratio (above 12.0:1) and often runs at high speed, the iridium alloy spark plug seems to be the right choice. But there are more car owners not car, nor long with high speed, the iridium spark plug is a waste. Most people are just on holiday cruises or on weekdays. The speed is not high, but most of the time the speed is lower than the machine itself expects the best speed. Therefore, depending on the driving area and the custom, choose the correct heat value of the spark plug. This is more effective and econ