手机结构件工艺简介（Brief introduction of mobile phone structure technology）.docVIP

手机结构件工艺简介（Brief introduction of mobile phone structure technology） The first part: shell categories: plastic shell, plastic decorative parts, plastic battery cover I. material: 1, commonly used GE PC+ABS-1200HF and electroplating grade ABS plastic material. The properties of PC+ABS materials is toughness, good sealing, high mechanical strength, chemical resistance, texture, high mobility, easy injection molding; electroplating grade ABS strength is lower than that of PC+ABS, mainly used for decorative plating. There is already a GE PC+ABS (model 1300HF) that can be painted or plated. 2, and other available materials are: PC, glass fiber reinforced PC+ABS, LG and Samsungs PC+ABS. Two, surface treatment process: spray +UV, electroplating, silk screen, etching, leather paste 1 、 spraying process: (1) materials include paint, UV (hard surface, protective effect), thinner. The factory (or paint factory) to paint according to customer demand, the formation of a variety of color schemes. Spraying method has hand spray and machine spraying (automatic spraying line) two kinds, hand spray is mainly used for customer proofing, confirm color scheme, pay attention to, hand spray color effect and machine jet color difference. Machine jet is used in mass production. The automatic spraying line is usually between 80-400 meters long (two spray, two coating, three spray, three coating), the production capacity is 5000-200000 pieces / circle. (2) color control: A, paint dilution ratio, paint thickness, UV brightness (that is usually said a few points) affect the color effect; B - the influence of material - in principle, light paint uses light material, dark paint, dark material; C, some special color must be sprayed two times with different primer, and UV, in order to reflect the effect of color, such as red, usually the first silver painted, then painted red. D, light shading paint spray paint - light rate is very low, directly spray on the shell material, who would come through to