数控刀片详解（NC blade detail）.docVIP

数控刀片详解（NC blade detail） Depending on the size of the blade, its use is different Indexable inserts designation of GB / T5343.1, which is equivalent to the IS The utility model is suitable for the preparation of a modular cutter head of an indexable external turning tool, an end face tool, an anti shaping tool and a combined cutter. The model is also made up of a set of letters and numerical numbers arranged in a prescribed order. 2. indexable milling cutter type representation rules, which is based on ISO7406 - 1986. The utility model is suitable for the manufacture of Indexable Surface Milling cutters, three side edge (groove) milling cutters, sleeve end mills and cylindrical milling cutters. The model is made up of 11 numbers (the face milling cutter has only 10 digits and no eleventh digits). The front No. 1~4 indicates the features of the cutter. The number of bits behind the twists and turns indicates the way the blade is fitted and the blade features. 3. indexable shank cutters designation it is formulated based on the international standard on IS Its model is also made up of 11 digits. 5 of them indicate the features of the cutter body. The two numbers represent the features of the shank, and the other 4 indicate the clamping method of the blade and the length of the cutting edge. 4. indexable inserts, model number GB2076-87, equivalent ISO1832-85, domestic and foreign carbide plant cutting indexable inserts (including the blade and milling cutter) models are in line with this standard. It consists of ten numbers of digits arranged in a certain order by letters and numbers in the given sense. The eighth and ninth numbers indicate the cutting edge cross section and the cutting direction of the cutting edge only. Two. Indexable inserts, standard 1.GB2079 - 87 (instead of GB2079 - 80), nonporous carbide indexable inserts: this standard uses international standard ISO0883 - 1995. The standard provides TNUN, TNGN, TPUN, TPGN, SNUN, SNGN, SPUN,