直埋光缆有关（Direct buried cable）.docVIP

直埋光缆有关（Direct buried cable） 6.3 2 cross cable line design of directly buried pipeline fiber optic cable line protection 6.4 design requirements [content abstract] in this chapter this chapter mainly introduces the buried optical cable line, crossing the river by optical cable line design requirements, buried optical cable protection measures, pipeline design requirements of fiber optic cable, etc. This chapter focuses on the design method of the buried optical cable line and the river. The difficulty is the protection measure of embedded optical cable. 1. The route selection (1) of the direct buried optical cable (1) is shorter and less curved than the route conditions of the buried optical cable lines, which will not collapse or crack, etc. Low barrier, small soil erosion and small mechanical damage. When laying buried optical cable in the city, try to choose the pavement under the sidewalk to reduce the impact on urban traffic, and reduce the difficulty of digging the road. When crossing roads, railways and other underground pipelines, try to choose as narrow as possible and as vertical as possible. Try to parallel roads or streets, reducing the route of the cable to and from the roads or streets. When the route of the embedded cable is taken into account, the embedding position should be close to the road or the street. To reserve land for development or to plan for undecided areas and to build a high grade highway or a fast lane in the future. Other underground concealed facility facilities are complex, malfunctioning and easy to be damaged and buried. The buried optical cable line is less than the minimum distance required for other underground installations that have been built or planned. (2) the buried optical cable should be avoided in the area where the rock subgrade is not strong and has a potential location. There are often standing water, deep freeze and serious area. A place to manufacture or store dangerous goods. Buried optical cable embedding depth