plc填空（Fill in the blanks with PLC）.docVIP

plc填空（Fill in the blanks with PLC） 1. The work situation of electromagnetic institutions is usually characterized by _________ and _________. The relation curve of electromagnetic suction and _________ is called suction characteristic. 2. __ the main contactor... contact to break a large current of main circuit, auxiliary __... to break a small current control circuit. When the signal is obtained from the sensitive element, the actuator is called _________. 4. The fuse shall be used in the circuit as a protective effect of ___ short circuit, and shall be used with the protected circuit ___. 5. The phenomenon of using the contactors own auxiliary contact to make its coil electrified is called ___ self-locking ______. 6. In order to reduce starting current, the three-phase asynchronous motor usually adopts _________. 7. Programmable controller is developed on the basis of _________ control technology and _________ control technology. 8. I/O interface is a connection between the input and output devices of PLC and industrial site, including digital I/O and _________. 9. The time taken from input sampling -- executing program -- output refresh is called a _________. 10. Different manufacturer production of PLC used in the programming language is different, generally _______ and _______ is the most commonly used PLC programming language. 11. PLC memory is divided into system storage, ___ program ______ memory and ____ user program _____ memory. 12. FX2N series PLC models the output type is: R - _______, T - _______, S - _______. 13. FX2N series PLC input relay (X) can only be driven by _________ and cannot be driven by program. 14. When a coil has multiple branches in parallel, the branch of a single contact should be placed on the _________, and the circuit with multiple contacts is placed in _________, which can reduce the storage unit. 15. When designing a PLC program with sequential control method, a working cycle of the system is decomposed into a number of sequenti