钢结构考试简答（The steel structure test is short answer）.docVIP

钢结构考试简答（The steel structure test is short answer） 1. In which case does the butt weld need to be calculated? (7) Answer: the welding defect has little impact on the welding seam of the compression and shear. Therefore, it can be considered that the butt weld of compression and shear is equal to the strength of the female material, but the butt weld of the pull is sensitive to the defects. Because the weld and the strength of the secondary test are equal to the strength of the mother material, only the three-level test weld is required to carry out the tensile strength check. (4) Angle 56 degre