锅炉知识（Knowledge of boiler）.docVIP

锅炉知识（Knowledge of boiler） The control of the differential pressure and differential pressure of the circulating fluidized bed boiler 1 introduction As an extension of the circulating fluidized bed boiler in the domestic boiler operators operating level had the very big enhancement, the normal operation of some parameters (such as steam temperature, steam pressure and bed temperature) control can master the basic, but control of the complex material circulation system, some new start-up boiler operators, have not yet fully mastered. Material layer differential pressure and differential pressure chamber of a stove or furnace are two main control parameters in material circulation system, is reflected in furnace material and how much the two main circulating ash amount and the main parameters, reflect the running status of boiler material circulation system, has a great influence on the stable operation of the boiler, in the normal operation parameters such as bed temperature, load has great relationship with, operation process, according to working condition of the material layer differential pressure, adjusted to the best numerical differential pressure in hearth, can make boiler ash fuel and fly ash combustible material loss is reduced greatly, thus improve the boiler efficiency and economic benefit, save energy. 1.1 the concept of differential pressure of material layer The difference pressure of the material layer is the physical quantity of the height of the fluidized bed material, and the height of the material must correspond to the difference pressure of the material. Because in the condition of fluidization, fluidized bed of material layer differential pressure, per unit area with the wind plate of the upper material is about equal to the difference between the gravity and fluidized bed buoyancy, for fluidized bed boiler is running, according to the burning of coal and material layer differential pressure is useful to estimate the bed thickness. 1.2 the influ