机械工程与技术—基于ABAQUS的太阳能聚光器结构分析.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2012, 1, 14-18 doi:10.4236/met.2012.12003 Published Online June 2012 (/journal/met) Structural Analysis of Solar Concentrator Based on ABAQUS 1 1 1 2 Xiaoyi Shao , Xiao’an Chen , Yu Feng , Guoyang Wu 1The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 2Material Engineering Institute, Panzhihua University, Panzhihua Email: xiaoyishao@, xachen@ Received: Apr. 15th, 2012; revised: Apr. 27th, 2012; accepted: Apr. 28th, 2012 Abstract: Solar concentrator is the key component of Concentrating Solar Power (CSP), which has great impact of the wind load and production cost. The wind load can make the condenser move thus deviating from the theoretical position and affecting its efficiency. The efficiency and cost are the most important factors to be considered in the process of building a Solar Thermal Power Plant (STPP). The main research of this paper is to optimize the concentrator structure with ABAQUS Finite Element analysis software on given wind load with different places and structure in order to re- duce the displacement of concentrator, make full use of the material and reduce the cost. This article is to calculate the wind load value of the concentrator by simulating the system with the liquid software then obtains the displacement of the concentrator and analyzes the force of key parts. Therefore, we can adjust its arrangement and design to achieve the optimization purpose. Keywords: Concentration; Structural Optimization; ABAQUS; Wind Load 基于ABAQUS 的太阳能聚光器结构分析 1 1 1 2 邵晓义 , 陈小安 ，冯 煜 ，吴国洋 1