一个钢筋混凝土损伤塑性本构模型和工程应用_沈新普.pdf

24 9 Vol.24 No.9 2007 9 Sep. 2007 ENGINEERING MECHANICS 122 1000-4750(2007)09-0122-07 * 1 2 1 (1. 110023 2. 110168) ABAQUS - - -ABAQUS - ABAQUS ABAQUS O342 A A DAMAGE PLASTIC CONSTITUTIVE MODEL FOR REINFORCED CONCRETE AND ITS ENGINEERING APPLICATION * 1 2 1 SHEN Xin-pu , WANG Chen-yuan , ZHOU Lin (1. College of Architectural Engineering, Shenyang University of Technology, Shenyang, Liaoning 110023, China; 2. College of Material Engineering, Shenyang Polytechnic University, Shenyang, Liaoning 110026, China) Abstract: A damage-plastic constitutive model for reinforced concrete is proposed by applying a Representative Volume Element (RVE). Assumptions of strain harmony and equivalent strength are adopted. The property of reinforcement within the RVE is modeled by defining hardening-softening law of the stress-strain curve of the Representative Volume Element. And the Representative Volume Element is taken as a uniform continuum. The model proposed here has enriched the library of models for concrete under tension in ABAQUS software. For the purpose of validation, numerical examples of uniaxial tension and simple-supported beam under bending were presented. Application of the model to the elastoplastic damage analysis of an engineering structure of reinforced concrete under soil pressure and underground water pressure was carried out. Key words: plasticity; steel-bar-reinforced concrete; damage; constitutive model; ABAQUS; representative volume element [1~4]