锈蚀钢筋力学性能数字试验研究王巧平.pdf

41 1 浙 江 大 学 学 报( ) Vol.41 o. 1 2007 1 Journal of Zhejiang University(Engineering Science) Jan. 2007 1 2 王巧平, 吴胜兴 ( 1. , 210098; 2. , 210029) : ,. ,,, , .. : ; ;, , ;, . : ; ;; ;; : TU375 : A : 1008 973X(2007) 01 0083 05 Digital test study of corroded reinforcement mechanical properties WA G Qiao-ping, WU Sheng-xing ( 1. I nter national A ud it Colleg e , N anj ing A udit Univ er sity , N anj ing 210098, Ch ian; 2. Civ il E ng ineer ing Colleg e , H ohai Univ er sity , N anj ing 210029, Ch ina) Abstract: From tension strength tests of corroded re-bar, corroded sunken pits on the surface constitute the main factor of the reinforcement capability deterioration. Digital simulation test of different corroded state reinforcement were conducted by finite element method. Different corrosion degree and different cor- rosion state affect reinforcement capability. Results of simulation test were in agreement with those of ac- tual reinforcement test. A computation model of corroded reinforcement ultimate strength was put for- ward. Weight losing ratio and corrosion damage state aretwo key factors to reduce corroded reinforcement capability. Further analysis of digital test results, led to the conclusion that weight loss ratio is the main factor affecting uniformly corroded reinforcement ultimate strength, that weight loss ratio, corroded sunk- en pit depth and corroded sunken pit length are key factors affecting pit corroded reinforcement ultimate strength. Key words: one-side uniform corrosion; corroded sunken pit; corroded damage; reinforcement tension strength; finite element method; digital test , ,