聚四氟板材料标准（Ptfe material standard）.docVIP

聚四氟板材料标准（Ptfe material standard） Material standard of ptfe: 1, material standard QB/T 3625-1999, ptfe plate light industry standard QB/T3625-1999 (QB) this standard applies to the moulding process of ptfe plate or the blank by moulding method, hydraulic method to shape made by cutting or rolling processing board (hereinafter referred to as the board). 2. Processing technology standard: polytetrafluoroethylene sheet zbg33002-85 3. Test standard: GB/T 1040-1992 plastic tensile test method national standard (GB) GB/t1040-1992 Standard reference for each type 1. Polyethylene resin classification, model and name gb1845-80 2. PE pipe and pipe fittings according to polyethylene nominal density and The method of naming the melt flow rate gb9642-88 3. Low density polyethylene resin gb11115-89 Iv. High density polyethylene resin gb11116-89 5. Polypropylene resin gb12670-90 6. The name gb3402-82 for polyvinyl chloride and copolymer resin 7. Suspension method polyvinyl chloride resin gb5761-86 8. Polyvinyl chloride resin emulsion method) hg2-8883-76 The preparation method of polyvinyl chloride resin paste was gb12004.9-89 10. Soft polyvinyl chloride plastic gb8815-88 11. The polycarbonate material is named gb2919-82 12. Melt method polycarbonate resin gb2920-82 13. Acrylonitrile-butadiene-styrene (ABS) resin GB12672-90 14. Polystyrene molding and extrusion plastics are named gb6594-86 15. Polystyrene resin GB1267190 16. Methyl methacrylate copolymer plastic zbg32003-89 17. Polystyrene resin (suspension) hg2-1015-77 18. Polyamide 6 resin hg2-868-76 19. Polyamide 1010 resin hg2349-92 20, molding and extrusion with polyfluorinated fluorinated ethylene resin gb9351-88 21. Polytetrafluoroethylene material is named gb5477-85 22. Polytetrafluoroethylene resin fine grain powder GB832987 23. Universal molded ptfe resin gb7136-86 24. Polyfluorochloroethylene hg2-532-67 25. Phenolic molding compound is named gb1403-86 26. Phenolic molding plastic gb1404-86 27. Electrical insulation with p