灯光的认识（Light awareness）.docVIP

灯光的认识（Light awareness） When you look at it, you must have a good understanding of the light. 1, I do not rendering the appearance is light, appearance effect appears louqun building play a parallel light and some auxiliary floodlight is far from enough, the whole scene appears very inflexible, consult everybody have what good method? Answer: I dont know whether you say black day or day, say daytime. The light is divided into several kinds, first is the main light source, the light of the outside scene is the sun. But by the lamps of parallel light to simulate more, just useless at a lamp, a lamp that the light was too hard, set the light attenuation of big, make the light is downy, sloping downwards, and reflective of the outside world, also called the sky light, by the spotlights simulation, light Angle is big, obtuse, set the light attenuation of larger, the light is downy. Then it is the reflection, which is simulated by the spotlights, which is illuminated from the bottom of the ground, excluding the ground itself, the light is weaker than the main light source, and the large attenuation is set. In the end, it is filled with light, where the light is too dim, a floodlight is placed, and the light removal function is used to illuminate the darkness. Try using sunlight instead. The following content replies can be seen. 2. How the realistic effect of the tube lamp in the effect picture is made, the tube light itself is bright, and the light that is surrounded by the light of the tube lamp is so soft as that? A; You said that the so-called tube should be body light effect, consists of two parts, a light, tube light is actually transferred to the materials self-illumination value is very high, make its appear bright, seems to be the light (not bright light above), (2) in the canister light has always been under the spotlight, the direction and the roof has a certain slope (light on the wall or object), the soft hardness of light tones, the default value is 50 like,