液压油缸（The hydraulic oil cylinder）.docVIP

液压油缸（The hydraulic oil cylinder） 1. What material is the piston rod in the cylinder 2. About piston rod; The piston rod is usually made of 45 steel. In the case of heavy impact and heavy load transmission, 40Cr steel was used. This is to ensure that the piston rod has sufficient working strength. The piston rod is generally designed as a cylinder, and if the diameter is larger, the hollow piston rod can be used. Made by seamless steel tube no.45. When the piston rod is made, the blank should be processed by forging and machining, hardness HB = 230 ~ 250. The aim is to improve the mechanical processing performance and improve the working strength of the materials. The surface roughness of the piston rod after finishing is not greater than 0.65 mu m. In order to improve the anti-corrosion ability of piston rod, the working surface of the rod can be hard chromium plated. The piston rod and the end cover guide sleeve adopt H8 / f9. 3. Industry standard for piston rod 4. The standard GB/t238-1993 recommended standard GB/t2348-1993 for piston rod diameter series standard GB/t2350-1980. Please refer to the implementation. There is no industry standard for piston rod. 5. Function of piston rod of oil cylinder, function analysis 6. First, the gasoline pump draws oil from the oil tank to the atomizer, and then it can be atomized and then it will burn! This force drives the piston. The piston then transfers the force through the piston rod to the crankshaft. The crankshaft turns and sends the force to the gearbox, so the car goes away! In the whole, the piston rod ACTS as a transmission of force! 7. What is the function of the hydraulic cylinder? 8. Hydraulic transmission has various cylinders and motors, which are devices that convert the pressure of the liquid into mechanical energy and output it. The cylinder is mainly output linear motion and force. Hydraulic cylinder comes in many forms, which can be divided into three categories: piston type, plunger type and swing type