印刷纸张知识（Paper knowledge）.doc

印刷纸张知识（Paper knowledge） Classification by length and width: A4 size: 21 * 29.7cm B4 specification: 25 * 35.4, B5 specification: 18.2 * 25.7 The paper specification refers to the paper made, after trimming, cut to a certain size. In the past, I used to indicate the size of the paper by how much open (e.g., 8 or 16). Now I adopt the international standard, which stipulates that A0, A1, A2, B1, B2... Such marks represent the size of the paper. The ratio of the width of the paper to the width of the paper (in terms of X) and length (in Y) is X: Y = 1: n. According to the basic area of the paper, the dimensions are divided into A series, B series and C series, and the size of the size of A0 is 841mm by 1189mm, and the area is 1 square meter. The dimension of B0 is 1000mm x 1414mm, and the area area is 2.5m2. The dimensions of C0 are 917mm by 1279mm, with a width of 2.25 m2. The format of the copy paper is only A series and B series. If the A0 paper is divided into two equal parts along the length of the paper, it becomes a A1 specification, and the A1 paper is divided along the length direction, which becomes the A2 specification, so that it is open to the A8 specification. B8 paper is also opened to B8 specifications. The dimensions of A0 ~ A8 and B0 ~ B8 are listed in the table below. There are seven sizes of A3, A4, A5, A6 and B4, B5, B6 and so on. For example, A4 paper is to fold the paper of the basic dimensions of type A four times, so the area of A sheet of A4 paper is one of two to the fourth power of the basic paper area, namely 1/16. The rest depends on it. Printing paper is usually used in the paper, the classification of copy paper is divided by size, there are several criteria: 1, type A; 2. Type B; Type K, k-type paper is the type of paper we used to say. Only in the home can we use k-type paper. Now I usually use type A paper. Whether A type B type, its classification, such as the A5 is twice the A6, A4 is twice as large as the A5, twice that of A3, A4, B4