二级维护介绍（Secondary maintenance introduction）.doc

二级维护介绍（Secondary maintenance introduction） Acceptance criteria As a waste product, the car should be maintained in the secondary maintenance of the factory for every 7,500 to 10,000 kilometers in order to maintain its excellent performance. But the car owner is suspicious of secondary maintenance, doubt whether the service provider hit a pen in the second, or do not give foot maintenance. In fact, the car owner can rely on certain standard to accept the grade 2 maintenance quality, pay the cost also have the standard to follow. Yuan foren, a maintenance expert, offered some reference standards to his friends during the March 15 : 1. The engine through the sanqing/homework, should be easy to start, stable running and exhaust normal standards (exhaust), water temperature, oil pressure meet the requirements, speed smooth, no ring, the belt tensioning moderate, without four (water, oil, electricity, gas). 2. The direction free travel and the front beam meet the requirements, and turn to light, flexible and reliable, with the front wheel without the head and the running deviation. 3. The free travel of the clutch meets the requirements, the operation is convenient, the separation is thorough, the combination is smooth, reliable, the same is sound, the hydraulic system has no oil leakage. 4. The gearbox, drive axle, universal joint (or semi-axle) transmission gear, such as good lubrication, reliable connection, sound and overheated, no jumping, flexible, no oil leakage. 5. The brake pedal free stroke and brake intermittent meets the requirements, driving, parking brake, good braking when no running deviation phenomenon and braking when pulling the hysteresis, inertia proportion valve works well, doesnt leak. 6. The tire pressure is normal (different models have different high and low pressure standards). 7. The cantilever and shock absorber are fixed and reliable, the function is normal, the hub bearing temperature is not hot after driving. 8. Generator, starter, lighting